ProxmarkPro - Cloning a EM4100 Tag

July 23, 2019

This blog post covers the steps to Clone a EM4100 tag to a T5577 with a ProxmarkPro.

For this blog post you will need the following:

1. Turn on your ProxmarkPro and connect the Low Frequency Antenna.

2. Navigate to the EM4100 menu in unchained mode.

EM Menu

3. In the EM4100 menu select Read while the tag is in field. Once read the EM4100 tag will be saved to memory. Click the right button to continue back to the EM4100 menu.

EM Reading

4. Now that the tag has been read, navigate to the Clone option in the EM4100 menu. Place the T5577 tag in field and select the Clone option. If successful on the LCD the ProxmarkPro should show complete.

EM Cloning

5. Double check the EM4100 tag was cloned successfully by trying to read it. If it reads successfully then you have cloned your EM4100 tag.

 






Also in Blog

ProxmarkPro - General Tag Operations - Getting Started
ProxmarkPro - General Tag Operations - Getting Started

October 15, 2019

This blog post covers operations you can do with tags in Unchained Mode with the ProxmarkPro.

View full article →

ProxmarkPro - Unchained Mode - Getting Started
ProxmarkPro - Unchained Mode - Getting Started

October 15, 2019

Unchained mode is a user friendly on-screen menu to perform various tag operations. This blog post covers the main menus of these operations.

View full article →

ProxmarkPro - Client Setup - Getting Started
ProxmarkPro - Client Setup - Getting Started

October 15, 2019

Follow this guide to learn how to setup the client with the ProxmarkPro. The client is a way to communicate over USB with the ProxmarkPro, you can issue commands and the ProxmarkPro will output the results. The client is accessed through a terminal or command prompt.

View full article →

We use cookies to ensure that we give you the best experience on our website. If you continue we'll assume that you are understand this. Learn more
Accept